I’m a programmer and I still try to avoid appliances with a computer in them. It’s impossible to avoid every sort of computer unless you buy vintage stuff, but something like a microwave with a digital timer is still OK. However, something with wifi or a display showing more than the basic seven-symbol characters is out.
The old stuff is often not just less annoying but works better. For example, my old washer/dryer each took about 20 minutes for a standard cycle. My friend’s fancy new ones take an hour. Dishwashers have the same issue. I expect that the modern ones use less water and electricity, but I don’t think the savings would be worth the inconvenience even if they used none at all.
Both my split systems are “dumb” where their only controllable out the box via an IR remote. A couple of ESP32-C3 later and their WiFi enabled without the calling home jargon that comes with the oem add-on wifi modules.
My dryer is a heat pump - it takes longer than the old unit, but the energy consumption is far far less than the unit we had installed from the 80s. No need to make modifications to the house for a vent, or have the machine vent humid air into the house during a cycle either. Safety is another big plus on the dryer, old units are horribly dangerous by comparison.
I’m a programmer and I still try to avoid appliances with a computer in them. It’s impossible to avoid every sort of computer unless you buy vintage stuff, but something like a microwave with a digital timer is still OK. However, something with wifi or a display showing more than the basic seven-symbol characters is out.
The old stuff is often not just less annoying but works better. For example, my old washer/dryer each took about 20 minutes for a standard cycle. My friend’s fancy new ones take an hour. Dishwashers have the same issue. I expect that the modern ones use less water and electricity, but I don’t think the savings would be worth the inconvenience even if they used none at all.
Both my split systems are “dumb” where their only controllable out the box via an IR remote. A couple of ESP32-C3 later and their WiFi enabled without the calling home jargon that comes with the oem add-on wifi modules.
My dryer is a heat pump - it takes longer than the old unit, but the energy consumption is far far less than the unit we had installed from the 80s. No need to make modifications to the house for a vent, or have the machine vent humid air into the house during a cycle either. Safety is another big plus on the dryer, old units are horribly dangerous by comparison.