Built when Netflix first took away password sharing. Thanks for the heads up Netflix! Would not want to start this project now 😂

Edit: adding temp and specs

I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380

Drives are 10x 14 tb wdd in raidz1, 6 256gb sata ssds in a pair of 3 wide mirrors for special vdev metadata, a 512gb nvme for read cache, and a 64gb optane for slog

  • MrEff@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    24 hours ago

    I am guessing the egg-shell foamed enclosure is for the sound, but you probably have a bunch of sound coming from the fan port, nessisary for ventilation. You can cut a lot of the sound but maintain the airflow by cutting an s-shaped ducting spanning the width of the enclosure. The shape will drop the sound, while then ducting keeps the air flowing. I would not recommend any sorts of filters to block the sound because they are a bit too restrictive for an enclosure in your style.

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      23 hours ago

      I get about the same affect by placing a layer of the foam on the wall behind the fans. But you’re totally right. Without that lil bit the fan noise from the intake and exhaust was a lil noticeable

      • SkunkWorkz@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        9 hours ago

        Also high density mass loaded vinyl works better for your enclosure. Foam helps against reflections but they still let sound trough. Mass loaded vinyl basically adds mass to the walls of your enclosure which stops them from transferring the sound waves to the outside.

        • Hamknight@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          5 hours ago

          Does it help to point out this is vinyl backed foam 😉 really thin vinyl sheet on it, but it helps