LazaroFilm@lemmy.worldOPEnglish0·1 year ago- Remove the core of your Paracord (you need 1.5x of Paracord to wire length about (depending on wire thickness)
- Sleeve the Paracord over your wire. That’s the hard part. (My trick has been to solder a length of thick magnet wire to one side of the wire and use it as a needle to guide the wire down the sleeve.
- Add all the heat shrinks and connector sleeves you need
- Solder your connectors
- Look at your cable with a smirk
- Take photos of your cables
- Post on Lemmy