• brokenlcd@feddit.it
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    4 months ago

    When an artificer and a rouge are faced with the same problem.

    Edit: my english sucks

  • SendMePhotos@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    4 months ago

    Wouldn’t that be susceptible to melting due to oven temps? Or is that probably made from a higher temp filament?

    • Tenthrow@lemmy.worldM
      link
      fedilink
      arrow-up
      0
      arrow-down
      1
      ·
      4 months ago

      Depends on the type of filament used and temperatures that are actually present at the knob. I would say no since the temperature required to melt (or warp) the knob would have to be high enough to cause some pretty severe burns if you touched it with your hand. if the knobs on the oven/range are getting that hot, there is a lot more to worry about here than the knob melting.

  • ChaoticNeutralCzech@feddit.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    4 months ago

    My oven is so old I came across an identical one in an e-waste pile behind a store. I stole the timer knob and mechanism so I don’t need to keep using the broken one (manual only) anymore.

      • ChaoticNeutralCzech@feddit.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        4 months ago

        *Reused, which is preferred to recycling even if the materials are 100% recyclable.

        That’s what I told to the store employee I encountered coming to work via the back door. He wasn’t too happy but ultimately let me do it.