Hmmm… Interesting! I didn’t realize there was a fork, but then again, this is one of those tools I’ve had running for several months close to a year or so and never thought about it. The original dev, Corentin, has been working on many more new projects: https://bsky.app/profile/corentin.tech .

I have several services. Home Assistant is not one as it’s still a WIP for the person who’s developing a solution. It works, but I’m sort of holding off until I can test it more with the mobile app.

https://github.com/christiaangoossens/hass-oidc-auth

But, to answer your question: I log into Tailscale with it. I also have it connected to Proxmox and Portainer Additionally, I have it connected to Pomerium so I can log into my FreshTomato Router with a fingerprint :) I also have a self hosted PasteBin connected to it.

I just tested my version of Firefox (Fresh from Play Store) and it worked without issues on my end to login to the server.

The only browser I’m aware of which doesn’t support it is the Duck Duck Go Browser which is a shame. They don’t seem to care about enabling WebAuthn support.

Pocket id is my go to. I used to use Authentik, but it was overkill for us. Pocket ID is pretty simple to use and has a very nice interface to add your users and clients. Uncluttered and straight and to the point. Pocket ID doesn’t use UN/PW Combos. Instead, you use Passkeys as in webAuthn devices to log in, which IMHO is one of the better security paths.

https://github.com/pocket-id/pocket-id

I work from home, however my two systems (home and work) are on the same LAN, they don’t see each other for file sharing. I get paid via direct deposit like everyone else which means my pay stubs are all electronic. I print those out and then use WinSCP to copy those over to my desktop. No other files are ever sent.

At home, depending on the amount of files, I either use SFTP via Filezilla, or if the mood strikes me and for a single file, I will just use SCP if I’m already on the cli which is most of the time it seems anymore doing work on my personal servers. I’ve found that SFTP is faster at transferring than doing a copy/paste to the NFS share to the same drive.

Yes. I have a network server for my printer and works. Also a label printer hooked up via USB. Also USB SSD and other drives. You should not see any problems.

I came from Arch to Fedora as well but using Universal Blue’s images. In my case, Aurora (KDE), and daughter’s Bluefin (Gnome). They update in the background and only install when you reboot. So far, most of the newer software releases such as web browsers or the desktop environment fall within a day or two for being installed which is a nice alternative. The big plus I see on these too is they are immutable so if something installs or breaks, you just boot into the previous version from Grub and go from there.

Additionally, OpenSuse MicroOS has options for whatever environment you are used to such as Gnome or KDE, this is immutable as well. I view all of these as “Set and Forget”.

I have AdguardHome on my RPi4 (4GB) model, and it works perfectly fine. I have also hosted Pi-Hole v.5 and even their recent Pi-Hole v6 they just released on it and have even at times run TechnitiumDNS on it. Not all at once of course, but I wanted to let you know you can host any of these on a RPi without issues.

One think you get with the Pi-hole is you can set up a DNS entry where you could for example, set up “laptop” and any time you want to access it or ping it, anywhere on your network, you can simply just enter in http://laptop/ or ping laptop. With both AdguardHome and Technitium, you need to append the .local or .internal or .home subdomain to make it work. It’s not really an issue for me since I just modify my hosts file on my computer to do the same thing, but is sort of cool when you use a system on the network to just go to http://homepage/ to reach your dashboard like Homarr or Flame on your phone where you can’t adjust the hosts file as easily.

TechnitiumDNS is what you want if you are wanting to dive deep into your world of DNS configurations, from there, I was able to set up a redirect to my PXE boot server so when devices would grab their IP from the DHCP server, if they queried for a boot device, it would tell the device where to boot from. I’m pretty sure you can do that with PiHole, but I may be wrong. Additionally, with TechntiumDNS, I was able to set up an adblock for my IoT’s VLAN network. without the need to add a second one to the network. As far as I can tell, with the other solutions, this is not as easy to do.

If you are wanting to determine which would be easier to run, I would say AdguardHome for the easiest. Next in line is PiHole v6. and lastly TechnitiumDNS if you really want to dive into the complexities. It is a good business class DNS server. The reason I’m on AdGuardHome right now is for as others stated simplicity. TechnitiumDNS is overkill for my home network, PiHole V6 took forever for them to release, but was a major re-write and if you want to set up your DHCP static mapping like I do, they kneecapped the entry a bit. It’s still there, but not as easy to find and more of a thing like (I don’t recall the order it goes on) MAC;IP;HOSTNAME or something like that instead of the easier method of just clicking in a row and entering those data points one per field like AdGuardHome, and TechnitiumDNS do. Pihole V5 included.

My Network pretty much has 3 layers of DNS filtering active, The first layer is on my router which has built in adblock (FreshTomato), then AdGuardHome, and finally, browser level blocking. I don’t get Youtube Ads on my computers, but on the phones and TV I do. In the browser, I use U-Block Origin which is in the cat and mouse game with Youtube ad-blocking.

Maybe your own adblocker, I thought about doing that myself, I use the public one from adguard on my phone (dns.aguard-dns.com) but having it on your own device would be pretty slick perhaps. But thinking about it more, Google wouldn’t just let you use an internal IP for the private DNS. I have tried it with my locally hosted adblocker and it rejects it.

Or you could set up a dashboard like Homepage or Dashy, or Flame or ? Ultimately, your imagination would do! :)

NFS4 I don’t think its obsolete.

I use it for my Desktop computers to connect to the server. All of my systems use Linux so that’s my primary use. They backup to the server nightly.

I discovered about a few months ago that XCP-NG does not support NFS shares which was a huge dealbreaker for me. Additionally, my notes from my last test indicated that I could not mount existing drives without erasing them. I’m aware that I could have spun up a TrueNAS or other file sharing server to bypass this, but maybe not if the system won’t mount the drives in the first place so it can pass them to the TrueNAS . I also had issues with their xen-orchestra which I will talk about below shortly. They also at the time, used an out of date CentOS build which unless I’m missing something, is no longer supported under that branding.

For the one test I did which was for a KVM setup, was my Home Assistant installation, I have that running in Proxmox and ccomparativelyit did seem to run faster than my Proxmox instance does. But that may be attributed to Home Assistant being the sole KVM on the system and no other services running (Aside from XCP-NG’s).

Their Xen-Orchestra for me was a bit frustrating to install as well, and being locked behind a 14 day trial for some of the services was a drawback for me. They are working on the front end gui to negate the need for this I believe, but the last time I tried to get things to work, it didn’t let me access it.