• 2 Posts
  • 4 Comments
Joined 3 years ago
cake
Cake day: June 14th, 2023

help-circle

  • I agree with you about the sd cards. But pi 4 and higher can boot directly from SSD (in a usb enclosure, or for pi 5 via pci-e add on card). It takes a lot of the pain out of hosting on pi. I also still have an old pi 3b chugging along as a NUT server running off an sd-card with a read-only file system - another solution for the card rot problem.

    And they are still lower power then anything x86. For me a mix of both pi and mini-pc work great.



  • Agree!

    I used Home Assistant for a situation similar to OP’s in our last house. I installed a smart plug for the dehumidifier and a humidity sensor for the basement.

    Then I used Home Assistant to turn on the dehumidifier 2x/day in winter and 1x/day in summer (less humidity problem then and didn’t want excess heat in the basement). Turn it off when humidity reached the target.

    This saved a lot on both electricity and wear & tear not running the dehumidifier fan all the time when the humidity is below the unit’s setpoint. Ours was an LG model that is smart, but recalls its setting when the power is cut manually. Plumbed its hose output to a drain.

    This setup worked for about 5 years with no interruptions until I sold the house and the dehumidifier went with it.