…It was about ten minutes after I saw that my “ridiculous low-ball” Ebay bid for a branded battlecruiser had won. That said, it is way snappier (and louder) than any rubber dome I’ve ever used. It’s not a bad board at all, really, though the terminal scan code set it was flashed with means the converter is more or less mandatory, despite the board having a PS/2 connector.

  • wjrii@lemmy.worldOPEnglish
    0·
    3 days ago

    It’s electrically identical to a regular Model M, so almost certainly not. In looking into it, they changed three things:

    • dense little rubber domes in each key’s barrel instead of the buckling-spring assemblies
    • keycaps with stems that are mostly solid to actuate the domes. I put in a spare buckling spring keycap to see if it worked, and while nowhere near well enough to rely on, it snapped right in, and if you push hard enough it’ll actuate.
    • removed a thin sheet of rubber that cushioned the membrane from the plastic flippers attached the buckling springs.

    That’s it. Same controllers, same membranes, even the same cases.

    • blindbunny@lemmy.mlEnglish
      0·
      3 days ago

      I always wanted a mech version but after I released it has no rollover I lost interest. Thanks for sharing though. You’re right I didn’t even know these were real.

      • wjrii@lemmy.worldOP
        0·
        3 days ago

        If you want it badly enough, there’s the pricy “New Model F” capacitive buckling spring boards, and they have all three Model M layouts.

        • blindbunny@lemmy.mlEnglish
          0·
          2 days ago

          Ugh why did you tell me about this? You’re working for them aren’t you, you esoteric keyboard shill 😜

          • wjrii@lemmy.worldOP
            0·
            2 days ago

            lol, I have a lot of keyboards, many homemade, but I don’t think I’ve spent over a hundred bucks or so on any single one of them, and most are closer to half that. No Model F of any kind here, much less a new one.