Well, it turns out that a Seeed Xiao esp32 lora board fits exactly into the 18650 battery bank case from the dollar store. Added a 2500Mah cell, and RAK PCB internal antenna. Getting 14hrs from full charge to the cutoff, Bluetooth connected the whole time. I’m sure a NRF52 would fit just fine as well.

  • d00ery@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    9 days ago

    Looks very cool, but what does the esp32 lora board and RAK PCB internal antenna do for 14 hours? (I assume it’s not charging something!)

    • rustinmyeye@lemmy.mlOP
      link
      fedilink
      English
      arrow-up
      9
      ·
      9 days ago

      Its a meshcore companion. The original battery bank PCB is gone, and the lora radio happens to be the same size, so it fits in its spot.

    • rustinmyeye@lemmy.mlOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      9 days ago

      Bought one at a Dollarama in Carleton Place, and another at Giant Tiger (not a dollar store, but cheap store) in Arnprior. Ontario, Canada

  • rowinxavier@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    9 days ago

    Very nice, now the question is whether you want it running constantly or sleeping most of the time and booting up for short bursts. Could be handy to have it boot up at a scheduled time, listen for a message for 30 seconds, then sleep for a period. That would let you do a quick GPS fix and send the location, scan for Bluetooth or WiFi signals, read some other sensor, or do something else then send off the data and respond to a command if needed. Also a small solar panel on one side could be enough to dramatically increase the battery life, maybe even making it indefinite depending on the load, and 14 hours is enough to last overnight so that could make it a good repeater.